Commercial Automatic PVC Fast Acting Rapid Rolling Shutter Door

Product Description

Automatic High Speed PVC Rolling Shutter Door

Shanghai Marya high speed rolling shutter doors are designed for fast open and close, allowing people and/or equipment to move quickly through the opening. This type of doors is ideal for large size opening and designed for high performance daily use both internally and externally with minimal maintenance. The door operated as speed > 1m/s, this model doors offers beneficial energy saving in both commercial and industrial application. In additional it reduces noise and dust from nearby working areas. It was ideally choice for many commercial and industrial application

 

 

 

Fiber: industrial environmental protection high strength polyester fiber, double PVC coating, a variety of color selection (Yellow, red, blue, silver, ect.) Anti-corrosive, prevent ultraviolet ray, prevent salt, thickness of 0.9mm. Origin: Belgium.

Window Part: Transparent window part material is not easy aging, not variant, antifreeze performance is good, not sun crack in the winter

Aluminum Bar: Professional enhanced industrial aluminum alloy wind resistance reinforcement, thickness:3.0-5.0mm, low maintenance cost.

Sealing brush: Built-in brush seal,is better than traditoinal lateral seal brush seal, The bottom is equipped with increasing gas insulation cloth, can be closely integrated with ground.

Control system: Traditional mechanical limit switch combined with electronic limit switch, dual protection, the use of advanced science and technology, adopt high quality frequency converter and PLC control circuit,motor soft start,slow stop,

prolong the service life of the motor,Running speed is 0.6 ~ 1.5 M/S, can be adjusted according to customer needs, more humane; Rotary encoder limit, more stable,simple to set up.Door operation management, the data parameters,according to the actual need to adjust.

Overhead Shell: High quality steel plate welding, surface anti-corrosion treatment, is not easy to rust,beautiful and strong.

Motor shell with guide rail way:Motor shell made by China brand production manufacture,high quality of galvanized sheet fluor-carbon painting process, the rails thickness is 3.5mm aluminum alloy which is used in industry,surface oxidation treatment. Rail surface with bright decoration article,so the whole boday more coordinate and beautiful.

Power system: high-speed door power 220v/380v special brake motor,power 0.75KW/1.5KW/1500s/roll. bearing heavy load type S4.Can be manual when power off.

Infrared Security system: effectively prevent hit people.

Door and switch operation: Magnetism switch,control button,rocker,the external switch box,infrared security system.

Open ways when power off: Rocker,the reserve power supply.

Control System	DFL PLC / Holip PLCand other components.
Dynamical Systems	Motor: SEW / Powever / Damar or Nord from Germany Factory.(China unit: Powever/SERVO system)
	Most stable brake system or Advanced Servo System, 220V~380V/50 -60HZ
	Power: 0.75kw ~ 3.0kw(According to the size of door)
Fast Speed Gate Construction
Framework	In 2mm thickness cold-roll steel sheet or on request in Stainless steel INOX201/304, Plaint color accordingly to your order
Rolling Drum	2mm thickness steel/Galvanized rube with machined blacks at each side and incorporating high-speed bearing.
Cross Bar	Normal in aluminum rod for small doors. Additional with Steel pipe for large opening and high-wind application.
Color	Red/Yellow/Blue/Sky blue/Orange/Mesh white and yellow/White/Green/Black/Grey.
Transparent Window	Transparent pvc sheet 1.5mm thickness. Window sizes and loaction accordingly to your requirement.
Command System	Magnetic Loop/Radar Sensor/Rope switch/Remote Control/Finger printer/Bluetooth/Key card etc.
Safety System & Seal
Photocell Sensor	Installed ont he side track with emergency rebound opening when sensing obstacles.
Safety edge bottom	When the people or vehicle touch the bottom edge of closing doors, It bound up automaticlly.
Emergency stop protection	With emergency stop button on the main control board.
Seal	Seal brush are installed inside of guider rail. Besides there is trap heavier fabric on the bottom, Close to any uneven ground.
Technical Parameter	Power Supply: Single or Three phase 220V~260V.. Three phase 380V~460V. 50/60HZ.
	Max Size: 10m width * 15m height
	Opening & Colsing speed: 0.7~1.5m/S
	Operation Frequency: 1000~1500 Cycles/Day
	Wind load: 15m/S

 

About Marya:

 
 

WHY the US?

We can provide DQ, IQ, PQ, OQ documents service

We can provide overseas machine installation and commissioning

We can provide free training service for your employee

We can provide One year guarantee for the machine

We can provide 24 hours of technical support by email

We can provide our installation team to your country to do the installation 

We can provide user friendly English Software, user manual, and detailed video

Looking forward to cooperating with you.