Marya GMP Standard Injectable Liquid Closed Ampoule Filling Sealing Machine

• Customization: Available
• After-sales Service: Provided
• Warranty: 1 Year
• Type: Piston Filling Machine
• Automatic Grade: Fully Automatic
• Material Type: Liquid
• Filling Valve Head: Multi-Head
• Feed Cylinder Structure: Single-Room Feeding
• Dosing Device: Plunger
• Filling Principle: Pressure
• Packaging Container Lifting Structure: Pneumatic Lifting
• Structure: Linear
• Packaging: Bottle
• Packaging Material: Glass
• Filling Precison: ± 1%
• Contact Parts: Stainless Steel 316L
• Filling Head: Customized
• Filling Mechanism: Piston Pump Filling, Servo Driven Filling and Peri
• Transport Package: Export Standard Wooden Case
• Specification: customized
• Trademark: Marya
• Origin: China
• HS Code: 8422303090

Product Description

Marya GMP Standard Injectable Liquid Closed Ampoule Filling Sealing Machine
 

Product Description

1. Introduction

The closed ampoule filling machine is a new generation of the closed ampoule open, drawing, filling and sealing combined equipment for injections. It uses rectangular feeding instead of the traditional ampoule feeding method. In this case, the feed is stable and the ampoule is not easily damaged. There is a modern clutch under the ampoule feeding hopper. Therefore, the ampoule feeding can be stopped at any time while the machine is still running. Therefore, it can reduce the loss of ampoules. Change the electromagnetic switch to a mechanical switch in the section where filling is stopped. It is reliable and durable. The bottle discharge device adopts a structure of pouring and arranging bottles. It greatly reduces the damage rate of finished ampoules.
This machine is based on the principle of inclined movement of ampoules during filling and sealing. The filling device is built on a stainless steel square pipe rack, completely surrounded by a stainless steel cover, and has a matte finish. In addition, there is a large opening at the bottom of the machine for easy cleaning. The suspended electrical control panel is lifted from the machine for easy operation and safety. The ampoule filling and sealing machine is suitable for ampoule filling in industries such as pharmaceuticals, cosmetics, agriculture, and chemicals.
 

2. Salient Features
1.Suitable for filling and sealing of type 'D' ampoules.
2.All contact parts made from high quality Stainless Steel 316L & other Non-contact parts made from Stainless Steel 304.
3.Minimum change over parts from 1ml to 10ml ampoule size.
4."No Ampoule - No Filling" system.
5.Ampoule neck centering during gas flushing and filling operations.
6.Possibility of nitrogen gas flushing before, during and after filling.
7.Full accessibility allows easy maintenance.
8.Compact GMP model.
9.Machine equipped with pre-warming station.
Minimum change over time, little maintenance & easy cleaning.
10.Higher output up to 12000 Ampoules per hour.
11.Different types of filling mechanism options:piston pump filling, servo driven filling and peristaltic pump filling.


3. Process Operation
The pre sterilized D-shaped ampoule tray can be directly loaded into the machine's inclined hopper. The magazine type medicine box conveys closed ampoules on a moving inclined ampoule rack in a manner of one/two/four/six/eight. The rotating rod of the ampoule rotates the ampoule, and the extreme pressure of the gas heats the ampoule. The ampoule opening process is completed by preheating and opening under gas pressure (LPG+oxygen). During the ampoule movement process, the pre inflation, filling, post inflation, preheating, and sealing stations perform filling and sealing operations. Finally, the filled and sealed ampoules will automatically be collected onto the machine's collection tray.

 
2. Technical Parameter
 

Model	MY-1C	MY-2C	MY-4C	MY-8C
No. of Head	Single	Two	Four	Eight
Syringes	One	Double	Four	Eight
Ampoule Sizes	Up to 25 ampoules/minute	Up to 50 ampoules/minute	Up to 100 ampoules/minute	Up to 200 ampoules/minute
Filling Precision	± 1%	± 1%	± 1%	± 1%
Filling Pump	Piston Pump	Piston Pump	Piston Pump	Piston Pump
Burner Gas	LPG & Oxygen	LPG & Oxygen	LPG & Oxygen	LPG & Oxygen
Nitrogen Arranegment	Before & After Filling	Before & After Filling	Before & After Filling	Before & After Filling
Number of Fill Nozzles	One	Two	Four	Eight
Number of Nitrogen Nozzles	One	Four	Eight	Sixteen
Number of Sealing Burners	One	Four	Eight	Sixteen
Power Required	0.5 H.P.	1 H.P.	1 H.P.	2 H.P.
Power Voltage	230 Volts, Single Phase, 50 Hertz, 4 Wire System	230 Volts, Single Phase, 50 Hertz, 4 Wire System	230 Volts, Single Phase, 50 Hertz, 4 Wire System	230 Volts, Single Phase, 50 Hertz, 4 Wire System
Contact Parts	Made from Stainless Steel 316L	Made from Stainless Steel 316L	Made from Stainless Steel 316L	Made from Stainless Steel 316L
Overall Dimension	1050mm (L) x 610mm (W) x 965mm (H) approx.	1150mm (L) x 760mm (W) x 965mm (H) approx.	1400mm (L) x 1070mm (W) x 965mm (H) approx.	2700mm (L) x 1400mm (W) x 1100mm (H) approx.

 
 

About Us

Why choose us

Workshop

Certificate

Project cases & Our Customer

Exhibition & Our Team

Packaging & Shipping